Contrib:KeesWouters
From CAELinuxWiki
Revision as of 12:54, 14 March 2010 by Keeswouters (Talk | contribs)
A few simple examples on using Salome - Code Aster platform
- Partitioning
With Salome it took me quite some time to find out how to define different volumes in one construction.
In this example four different volumes by partitioning a construction are defined.
Contrib:KeesWouters/partition - Use of ASTK
Contrib:KeesWouters/shell/static/astk - Use of shell (coque_3d) elements
This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.
Contrib:KeesWouters/platedynamics - Convergence of solid and shell elements
This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.
Stresses in centre and outside layers
A small detour on how to determine the stresses at the centre and outside layers of shell elements
Printing reaction forces and stresses in a table
The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).
Contrib:KeesWouters/staticshell - Applying forces on line segments
Using a simple spring construction, forces are applied on nodes, a line segment and surface
Contrib:KeesWouters/spring - Plastic behaviour of a V shape construction
The material non linear behaviour of a v shape construction with solid elements
Contrib:KeesWouters/plasticity - Buckling behaviour of a beam
The geometrical non linear behaviour of a beam using solid elements
Contrib:KeesWouters/beambuckling - Shell analysis
Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Extraction of displacement and stresses.
Extraction of minimum and maximum displacements, forces and moments and stresses.
Contrib:KeesWouters/shell - Modal analysis of an axial loaded cylinder
The modal analysis of a construction under prestress. Also the buckling behaviour is the cylinder is given using shell coque_3d elements - frequency domain
Contrib:KeesWouters/prestressmodal - Dynamic analysis of an axial loaded cylinder
The dynamic analysis of a cylinder loaded by an axial force with coque_3d elements. Geometry based on the cylinder under prestress - time domain
Contrib:KeesWouters/dynamicload - The connection between shell and solid elements
To establish a connection between shell and solid elements the Arlequin method can be used.
A comparison with a solution using nodes on a solid region between shell and solid elements is given
Contrib:KeesWouters/shellsolid - The stresses of an assembly of shells and volumes
Based on the previous contribution the element and equivalent stresses are determined
Contrib:KeesWouters/stress_2D3D - Mesh refinement - Homard
Mesh refinement by using the macro MACR_ADAP_MAIL.
Contrib:KeesWouters/Homard
Versions of the software:
- december 2009
- Salome5.1.3
- november 2009
- OS Ubuntu 9.10 Karmic Koala (64 bit)
- August 2009
- Salome 5.1.2 (64 bit)
- april 2009:
- Salome 4.1.4 (32 bit)
- Code Aster 9.4 (32 bit)
- ASTK 1.7.1
- OS Ubuntu 9.04 Jaunty (64 bit)
- Solving installation problems
Contrib:KeesWouters/installproblems