Difference between revisions of "Contrib:KeesWouters"
From CAELinuxWiki
Keeswouters (Talk | contribs) |
Keeswouters (Talk | contribs) |
||
Line 5: | Line 5: | ||
# '''Applying forces on line segments'''<br/>Using a simple spring construction, forces are applied on nodes, a line segment and surface<br/>[[Contrib:KeesWouters/spring]]<br/><br/> | # '''Applying forces on line segments'''<br/>Using a simple spring construction, forces are applied on nodes, a line segment and surface<br/>[[Contrib:KeesWouters/spring]]<br/><br/> | ||
# '''Plastic behaviour of a V shape construction'''<br/>The material non linear behaviour of a v shape construction with solid elements<br/>[[Contrib:KeesWouters/plasticity]]<br/><br/> | # '''Plastic behaviour of a V shape construction'''<br/>The material non linear behaviour of a v shape construction with solid elements<br/>[[Contrib:KeesWouters/plasticity]]<br/><br/> | ||
− | # '''Buckling behaviour of a beam'''<br/>The geometrical non linear behaviour of a beam | + | # '''Buckling behaviour of a beam'''<br/>The geometrical non linear behaviour of a ''beam'' using solid elements<br/>[[Contrib:KeesWouters/beambuckling]]<br/><br/> |
+ | # '''Modal analysis of a cylinder under prestress'''<br/>The modal analysis of a construction under prestress. Also the buckling behaviour is the cylinder is given using shell ''coque_3d'' elements<br/>[[Contrib:KeesWouters/prestressmodal]]<br/><br/> | ||
''Versions of the software: | ''Versions of the software: |
Revision as of 14:02, 3 September 2009
A few simple examples on using Salome - Code Aster platform
- Use of shell (coque_3d) elements
This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.
Contrib:KeesWouters/platedynamics - Convergence of solid and shell elements
This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.
Stresses in centre and outside layers
A small detour to how to determine the stresses at the centre and outside layers is given.
Printing reaction forces and stresses in a table
The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).
Contrib:KeesWouters/staticshell - Partitioning
With Salome it took me quite some time to find out how to define different volumes in one construction.
In this example four different volumes by partitioning a construction are defined.
Contrib:KeesWouters/partition - Applying forces on line segments
Using a simple spring construction, forces are applied on nodes, a line segment and surface
Contrib:KeesWouters/spring - Plastic behaviour of a V shape construction
The material non linear behaviour of a v shape construction with solid elements
Contrib:KeesWouters/plasticity - Buckling behaviour of a beam
The geometrical non linear behaviour of a beam using solid elements
Contrib:KeesWouters/beambuckling - Modal analysis of a cylinder under prestress
The modal analysis of a construction under prestress. Also the buckling behaviour is the cylinder is given using shell coque_3d elements
Contrib:KeesWouters/prestressmodal
Versions of the software:
- August 2009
- Salome 5.1.2 (64 bit)
- april 2009:
- Salome 4.1.4 (32 bit)
- Code Aster 9.4 (32 bit)
- ASTK 1.7.1
- OS Ubuntu 9.04 Jaunty (64 bit)