Difference between revisions of "Contrib:KeesWouters/shell"
From CAELinuxWiki
Keeswouters (Talk | contribs) m (→Shell analysis) |
Keeswouters (Talk | contribs) m (→Shell analysis) |
||
| Line 4: | Line 4: | ||
#*[[Contrib:KeesWouters/shell/platedynamics]]<br/> | #*[[Contrib:KeesWouters/shell/platedynamics]]<br/> | ||
#* Use of shell coque_3d elements<br/>This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements<br/>key words:<br/> | #* Use of shell coque_3d elements<br/>This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements<br/>key words:<br/> | ||
| − | #** | + | #** use of Salome: definition of geometry, mesh - export of mesh<br/> |
| − | #** | + | #** use of ASTK<br/> |
| − | #** | + | #** conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)<br/> |
| − | #** | + | #** projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements<br/> |
| − | #** | + | #** definition of:<br/> |
| − | #*** | + | #*** shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep<br/> |
| − | #*** | + | #*** mass, stiffnes matrix and range of dof, NUME_DDL<br/> |
| − | #*** | + | #*** definition of eigenvalue extraction - <br/> |
| − | #** | + | #** print mass table<br/> |
# '''Static analysis of shell construction'''<br/> | # '''Static analysis of shell construction'''<br/> | ||
#* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Extraction of displacement and stresses.<br/>[[Contrib:KeesWouters/shell/static]] | #* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Extraction of displacement and stresses.<br/>[[Contrib:KeesWouters/shell/static]] | ||
Revision as of 22:09, 29 April 2013
Shell analysis
- Dynamic shell analysis
- Contrib:KeesWouters/shell/platedynamics
- Use of shell coque_3d elements
This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements
key words:
- use of Salome: definition of geometry, mesh - export of mesh
- use of ASTK
- conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)
- projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements
- definition of:
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- mass, stiffnes matrix and range of dof, NUME_DDL
- definition of eigenvalue extraction -
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- print mass table
- use of Salome: definition of geometry, mesh - export of mesh
- Contrib:KeesWouters/shell/platedynamics
- Static analysis of shell construction
- Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Extraction of displacement and stresses.
Contrib:KeesWouters/shell/static
- Contribution in collaboration with Brigde.
- Static shell analysis - generation of tables
- Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Focus on extraction of minimum and maximum displacements, forces and moments and stresses.
Contrib:KeesWouters/shell/tables
- Contribution in collaboration with Brigde.
- Plot results of shell COQUE_3D calculations
- The centre node of COQUE-3D elements is a headache in postpro.
Projecting the results to a mesh without centre nodes.
Presented on a plate with four holes.
Focus on displacements and stresses.
Contrib:KeesWouters/shell/plotcoq3d
- The centre node of COQUE-3D elements is a headache in postpro.
- Static analysis of shell construction
