Difference between revisions of "Contrib:KeesWouters/shell"
From CAELinuxWiki
Keeswouters (Talk | contribs) m (→Shell analysis) |
Keeswouters (Talk | contribs) m (→Shell analysis) |
||
Line 2: | Line 2: | ||
* [[Contrib:KeesWouters]] | * [[Contrib:KeesWouters]] | ||
− | # '''Dynamic shell analysis'''<br/>* Dynamics of shell.<br/>[[Contrib:KeesWouters/shell/platedynamics]]<br/>* Use of shell coque_3d elements<br/> | + | # '''Dynamic shell analysis'''<br/>* Dynamics of shell.<br/>[[Contrib:KeesWouters/shell/platedynamics]]<br/>* Use of shell coque_3d elements<br/>* This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements<br/>** key words:<br/>*** use of Salome: definition of geometry, mesh - export of mesh<br/> |
− | * This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements<br/> | + | |
− | ** key words:<br/> | + | |
− | *** use of Salome: definition of geometry, mesh - export of mesh<br/> | + | |
*** use of ASTK<br/> | *** use of ASTK<br/> | ||
*** conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)<br/> | *** conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)<br/> |
Revision as of 22:03, 29 April 2013
Shell analysis
- Dynamic shell analysis
* Dynamics of shell.
Contrib:KeesWouters/shell/platedynamics
* Use of shell coque_3d elements
* This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements
** key words:
*** use of Salome: definition of geometry, mesh - export of mesh
- use of ASTK
- conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)
- projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements
- definition of:
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- mass, stiffnes matrix and range of dof, NUME_DDL
- definition of eigenvalue extraction -
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- print mass table
- use of ASTK
- Static analysis of shell construction
* Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Extraction of displacement and stresses.
Contrib:KeesWouters/shell/static - Static shell analysis - generation of tables
* Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Focus on extraction of minimum and maximum displacements, forces and moments and stresses.
Contrib:KeesWouters/shell/tables - Plot results of shell COQUE_3D calculations
* The centre node of COQUE-3D elements is a headache in postpro.
Projecting the results to a mesh without centre nodes.
Presented on a plate with four holes.
Focus on displacements and stresses.
Contrib:KeesWouters/shell/plotcoq3d - Static analysis of shell construction
Contrib:KeesWouters/shell/static/command