Contrib:KeesWouters/plasticity/solidbeam
From CAELinuxWiki
Revision as of 21:36, 28 April 2010 by Keeswouters (Talk | contribs) (→'''Geometry and mesh of the solid beam''')
Solid beam under plastic deformation
This contribution is based on . This contribution has been created because of some incompatibilities between version CA10.X.Y and earlier versions. For detailed description of the calculation sequence look here.
Geometry and mesh of the solid beam
Using a strait solid beam is easy for analysis of the stresses and strains.
-
* 
Fbot and Ftop are the bottom and top surfaces.
Lx and Ly are the edges along the x and y axes.
