Contrib:KeesWouters
From CAELinuxWiki
Revision as of 13:57, 12 August 2009 by Keeswouters (Talk | contribs)
A few simple examples on using Salome - Code Aster platform
- Use of shell (coque_3d) elements
This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.
Contrib:KeesWouters/platedynamics - Convergence of solid and shell elements
This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.
Stresses in centre and outside layers
A small detour to how to determine the stresses at the centre and outside layers is given.
Printing reaction forces and stresses in a table
The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).
Contrib:KeesWouters/staticshell - Partitioning
With Salome it took me quite some time to find out how to define different volumes in one construction. In this example four different volumes by partitioning a construction are defined.
Contrib:KeesWouters/partition - Applying forces on line segments
Using a simple spring construction, forces are applied on nodes, a line segment and surface
Contrib:KeesWouters/spring - Plastic behaviour of a V shape construction
The material non linear behaviour of a v shape construction
Contrib:KeesWouters/plasticity
Versions of the software in use:
- april 2009:
- Salome 4.1.4 (32 bit)
- Code Aster 9.4 (32 bit)
- ASTK 1.7.1
- OS Ubuntu 9.04 Jaunty (64 bit)
- August 2009
- Salome 5.1.2 (64 bit)