Contrib:KeesWouters

A few simple examples on the use of the Salome - Code Aster platform

1. Use of coque_3d elements
   This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.
   Contrib:KeesWouters/platedynamics
   
   
2. Convergence of solid and shell elements
   This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.
   Stresses in centre and outside layers
   A small detour to how to determine the stresses at the centre and outside layers is given.
   Printing reaction forces and stresses in a table
   The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).
   Contrib:KeesWouters/staticshell
   
   
3. Partitioning
   With Salome it took me quite some time to find out how to define different volumes in one construction. In this example four different volumes by partitioning a construction are defined.
   Contrib:KeesWouters/partition

Versions of the software that has been used (april 2009):

• Salome 4.1.4 (32 bit)
• Code Aster 9.4 (32 bit)
• ASTK 1.7.1
• OS: Ubuntu 9.04 Jaunty (64 bit)