Difference between revisions of "Contrib:KeesWouters"
From CAELinuxWiki
Keeswouters (Talk | contribs) |
Keeswouters (Talk | contribs) |
||
Line 1: | Line 1: | ||
'''A few simple examples on the use of the Salome - Code Aster platform''' | '''A few simple examples on the use of the Salome - Code Aster platform''' | ||
# This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.<br/>[[Contrib:KeesWouters/platedynamics]] | # This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.<br/>[[Contrib:KeesWouters/platedynamics]] | ||
− | # This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.<br/> A small detour to how to determine the stresses at the centre and outside layers is given.<br/>The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (solid elements only).<br/>[[Contrib:KeesWouters/staticshell]] | + | # This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.<br/> A small detour to how to determine the stresses at the centre and outside layers is given.<br/>The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).<br/>[[Contrib:KeesWouters/staticshell]] |
# With Salome it took me quite some time to find out how to define different volumes in one construction. In this example four different volumes by partitioning a construction are defined.<br/>[[Contrib:KeesWouters/partition]] | # With Salome it took me quite some time to find out how to define different volumes in one construction. In this example four different volumes by partitioning a construction are defined.<br/>[[Contrib:KeesWouters/partition]] | ||
Revision as of 17:25, 2 June 2009
A few simple examples on the use of the Salome - Code Aster platform
- This contribution is an simple example of a dynamic plate modelled by shell (coqued_3d) elements.
Contrib:KeesWouters/platedynamics - This contribution is mainly a comparison between solids and shells (coque_3d) elements on convergence of the displacements.
A small detour to how to determine the stresses at the centre and outside layers is given.
The retrieval of the the nodal forces, reaction forces and stresses into a table are discussed (for solid elements only).
Contrib:KeesWouters/staticshell - With Salome it took me quite some time to find out how to define different volumes in one construction. In this example four different volumes by partitioning a construction are defined.
Contrib:KeesWouters/partition
Versions of the software that has been used (april 2009):
- Salome 4.1.4 (32 bit)
- Code Aster 9.4 (32 bit)
- ASTK 1.7.1
- OS: Ubuntu 9.04 Jaunty (64 bit)