Difference between revisions of "Contrib:KeesWouters/solids/mooney-rivlin"
Keeswouters (Talk | contribs) (→'''Geometry''') |
Keeswouters (Talk | contribs) m (→'''Geometry''') |
||
Line 12: | Line 12: | ||
: [[Image:kw_mooneyrivlin_block.png]] : [[Image:kw_mooneyrivlin_groups.png]] | : [[Image:kw_mooneyrivlin_block.png]] : [[Image:kw_mooneyrivlin_groups.png]] | ||
− | '''Loads and boundary conditions''' | + | '''Loads and boundary conditions'''<br/> |
A pressure of 6 [MPa] is applied to the top area Atop.<br/> | A pressure of 6 [MPa] is applied to the top area Atop.<br/> | ||
The boundary conditions are applied to the bottom area: all z displacements of the bottom area are restricted.<br/> | The boundary conditions are applied to the bottom area: all z displacements of the bottom area are restricted.<br/> | ||
On node Nfixx the displacement in y direction is restricted.<br/> | On node Nfixx the displacement in y direction is restricted.<br/> | ||
On nodes Nfixy (two nodes on the extremes of the x axis) the displacement in x direction is restricted. | On nodes Nfixy (two nodes on the extremes of the x axis) the displacement in x direction is restricted. |
Revision as of 14:46, 30 September 2011
Material behaviour Mooney-Rivlin
Simple block of Mooney-Rivlin material
september 2011 - Salome 6.3 - Code Aster VERSION DE DEVELOPPEMENT 11.00.10 - Ubuntu 11.04
This is a simple example of a block of Mooney-Rivlin material. As usual, the input and partly the output files can be found at the end of this contribution.
Errors are all mine.
Creative criticism welcome (of course I rather have positive than negative remarks).
Have fun.
Geometry
This is really annoying. A block of 5x12x43 [mm]. My only excuse is that it does show the behaviour of the material.
Four groups are defined on the block: two areas, top and bottom areas, and two node groups: centre node of the bottom plane and two nodes on the extreme positon of the y-axis. The are used to define boundary conditions and pressure (load).
Loads and boundary conditions
A pressure of 6 [MPa] is applied to the top area Atop.
The boundary conditions are applied to the bottom area: all z displacements of the bottom area are restricted.
On node Nfixx the displacement in y direction is restricted.
On nodes Nfixy (two nodes on the extremes of the x axis) the displacement in x direction is restricted.