Difference between revisions of "Contrib:KeesWouters/bc"

From CAELinuxWiki
Jump to: navigation, search
m (→‎'''Geometry and mesh of the block with cylindrical hole''')
m (→‎'''Geometry and mesh of the block with cylindrical hole''')
Line 1: Line 1:
 
=='''Geometry and mesh of the block with cylindrical hole'''==
 
=='''Geometry and mesh of the block with cylindrical hole'''==
−
This is a very simple construction to show the use of ''LIAISON_DDL'' to simulate boundary condition on a cylindrical hole. It just shows the use of it: -the code is far from general. This may be improved in further versions.<br/>
+
Applied on a simple block with a cylindrical hole the use of LIAISON_DLL is shown to simulate a cylindrical coordinate system
 +
Contrib:KeesWouters/bc/cylinder
 +
    * key words
 +
          o LIAISON_DDL
 +
          o simulated cylinder coordinates and boundary conditions
 
[[http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/bc/cylinder Geometry and mesh of the block with cylindrical hole]]
 
[[http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/bc/cylinder Geometry and mesh of the block with cylindrical hole]]

Revision as of 19:54, 7 August 2010

Geometry and mesh of the block with cylindrical hole

Applied on a simple block with a cylindrical hole the use of LIAISON_DLL is shown to simulate a cylindrical coordinate system Contrib:KeesWouters/bc/cylinder 

   * key words
         o LIAISON_DDL
         o simulated cylinder coordinates and boundary conditions

[Geometry and mesh of the block with cylindrical hole]

Retrieved from "http://caelinux.org/wiki/index.php?title=Contrib:KeesWouters/bc&oldid=5500"