Difference between revisions of "Contrib:KeesWouters/bc"

From CAELinuxWiki
Jump to: navigation, search
m ('''Geometry and mesh of the block with cylindrical hole''')
m ('''Geometry and mesh of the block with cylindrical hole''')
Line 1: Line 1:
 
=='''Geometry and mesh of the block with cylindrical hole'''==
 
=='''Geometry and mesh of the block with cylindrical hole'''==
 
Applied on a simple block with a cylindrical hole the use of LIAISON_DLL is shown to simulate a cylindrical coordinate system
 
Applied on a simple block with a cylindrical hole the use of LIAISON_DLL is shown to simulate a cylindrical coordinate system
Contrib:KeesWouters/bc/cylinder
+
Contrib:KeesWouters/bc
 +
 
 
     * key words
 
     * key words
 
           o LIAISON_DDL
 
           o LIAISON_DDL
           o simulated cylinder coordinates and boundary conditions
+
           o simulated cylinder coordinates and boundary conditions  
 
[[http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/bc/cylinder Geometry and mesh of the block with cylindrical hole]]
 
[[http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/bc/cylinder Geometry and mesh of the block with cylindrical hole]]

Revision as of 18:56, 8 August 2010

Geometry and mesh of the block with cylindrical hole

Applied on a simple block with a cylindrical hole the use of LIAISON_DLL is shown to simulate a cylindrical coordinate system Contrib:KeesWouters/bc

   * key words
         o LIAISON_DDL
         o simulated cylinder coordinates and boundary conditions 

[Geometry and mesh of the block with cylindrical hole]